技术支持
MERCURY 型号MW300R路由器网线连接在WAN接口电脑上不了网，连接在路由器的其他接口电脑却能上网，但无线网有信号却用不了。回答(条) 2013-10-02 18:48:23
问题描述：
你的回答：
MERCURY 型号MW300R路由器网线连接在WAN接口电脑上不了网，连接在路由器的其他接口电脑却能上网，但无线网有信号却用不了。回答(条) 2013-10-02 18:48:23
问题描述：
你的回答：
TL-WR842N无线路由器老是掉线,每次都要重新拔插头,求解决方法回答(条) 2013-12-17 18:57:10
问题描述：
你的回答：
##########################################################################
# TL-WR842N System Log
# Time = 2013-12-17 18:59:30 690s
# H-Ver = WR842N 4.0 00000000 : S-Ver = 1.2.7 Build 131025 Rel.41187n
# L = 192.168.1.1 : M = 255.255.255.0
# W1 = PPPoE : W = 123.79.99.49 : M = 255.255.255.255 : G = 123.79.96.1
# Cnt = 5376, Free = 5347, Busy = 29
##########################################################################
0days, 00:00:04, LAN: mirror0 set ip c0a80101 mask ffffff00
0days, 00:00:05, System start ok.
0days, 00:00:05, DHCPS: Send NAK
0days, 00:00:07, DHCPS: Send OFFER with ip 192.168.1.100
0days, 00:00:07, DHCPC: eth1 send DISCOVER with unicast flag 0
0days, 00:00:10, DHCPC: eth1 send DISCOVER with unicast flag 0
0days, 00:00:13, DHCPC: eth1 send DISCOVER with unicast flag 0
0days, 00:00:18, DHCPC: eth1 send DISCOVER with unicast flag 1
0days, 00:00:21, DHCPC: eth1 send DISCOVER with unicast flag 1
0days, 00:00:24, DHCPC: eth1 recv no OFFER, DHCP Service unavailable
0days, 00:00:35, DHCPC: eth1 send DISCOVER with unicast flag 1
0days, 00:00:38, DHCPC: eth1 send DISCOVER with unicast flag 1
0days, 00:00:41, DHCPC: eth1 send DISCOVER with unicast flag 1
0days, 00:00:44, Wantype change from dhcp to pppoe
0days, 00:00:45, PPP LCP: TX TERMINATION_REQUEST.
0days, 00:00:45, try special dail type: 0
0days, 00:00:45, PPPOE: TX PADI.
0days, 00:00:45, PPPOE: RX PADO,AC-NAME=ylzx10800E_2,AC-MAC=001E7398A1AA
0days, 00:00:45, PPPOE: TX PADR.
0days, 00:00:45, PPPOE: RX PADS.
0days, 00:00:46, PPP SM: retry 1/10.
0days, 00:00:46, PPP LCP: TX CONFIGURE_REQUEST.
0days, 00:00:46, PPP LCP: RX CONFIGURE_REQUEST.
0days, 00:00:46, PPP LCP: TX CONFIGURE_ACK.
0days, 00:00:46, PPP LCP: RX CONFIGURE_ACK.
0days, 00:00:47, PPP SM: retry 1/10.
0days, 00:00:47, PPP PAP: TX AUTHENTICATION_REQUEST.
0days, 00:00:47, PPP PAP: RX AUTHENTICATION_ACK.
0days, 00:00:47, PPP IPCP: RX CONFIGURE_REQUEST.
0days, 00:00:47, PPP IPCP: TX CONFIGURE_REQUEST.
0days, 00:00:47, PPP IPCP: TX CONFIGURE_ACK.
0days, 00:00:47, PPP IPCP: RX CONFIGURE_NAK.
0days, 00:00:47, PPP IPCP: TX CONFIGURE_REQUEST.
0days, 00:00:47, PPP IPCP: RX CONFIGURE_ACK.
0days, 00:00:47, PPP: ppp0 set localIp 7b4f623a dstIp 7b4f6001 mtu 1480
0days, 00:04:12, PPP LCP: TX TERMINATION_REQUEST.
0days, 00:04:12, PPPOE: TX PADT.
0days, 00:04:12, PPPOE: RX PADT.
0days, 00:04:14, PPP LCP: TX TERMINATION_REQUEST.
0days, 00:04:14, PPPOE: TX PADT.
0days, 00:04:14, try special dail type: 0
0days, 00:04:15, PPPOE: TX PADI.
0days, 00:04:15, PPPOE: RX PADO,AC-NAME=ylzx10800E_2,AC-MAC=001E7398A1AA
0days, 00:04:15, PPPOE: TX PADR.
0days, 00:04:15, PPPOE: RX PADS.
0days, 00:04:16, PPP SM: retry 1/10.
0days, 00:04:16, PPP LCP: TX CONFIGURE_REQUEST.
0days, 00:04:16, PPP LCP: RX CONFIGURE_REQUEST.
0days, 00:04:16, PPP LCP: TX CONFIGURE_ACK.
0days, 00:04:16, PPP LCP: RX CONFIGURE_ACK.
0days, 00:04:17, PPP SM: retry 1/10.
0days, 00:04:17, PPP PAP: TX AUTHENTICATION_REQUEST.
0days, 00:04:17, PPP PAP: RX AUTHENTICATION_ACK.
0days, 00:04:17, PPP IPCP: RX CONFIGURE_REQUEST.
0days, 00:04:17, PPP IPCP: TX CONFIGURE_REQUEST.
0days, 00:04:17, PPP IPCP: TX CONFIGURE_ACK.
0days, 00:04:17, PPP IPCP: RX CONFIGURE_NAK.
0days, 00:04:17, PPP IPCP: TX CONFIGURE_REQUEST.
0days, 00:04:17, PPP IPCP: RX CONFIGURE_ACK.
0days, 00:04:17, PPP: ppp0 set localIp 7b4f6331 dstIp 7b4f6001 mtu 1480
