技术支持
TP-LINK 842N 疯狂掉线回答(条) 2014-10-11 04:58:36
问题描述：##########################################################################
# TL-WR842N System Log
# Time = 2014-10-11 4:56:50 297s
# H-Ver = WR842N 4.0 00000000 : S-Ver = 2.2.8 Build 140929 Rel.43377n
# L = 190.168.1.1 : M = 255.255.255.0
# WAN = PPPoE : W = 10.198.0.43 : M = 255.255.255.255 : G = 10.198.1.1
# Cnt = 5504, Free = 5383, Busy = 121
##########################################################################
0days, 00:00:04, LAN: Attach mirror0 to stack.
0days, 00:00:04, WAN: Attach interface eth1.
0days, 00:00:04, LAN: Set interface mirror0 ip=190.168.1.1 netmask 255.255.255.0.
0days, 00:00:04, HTTPD: Http server start!
0days, 00:00:19, DHCPS: Send ACK to 190.168.1.101.
0days, 00:00:24, PPPOE: Standard authentication.
0days, 00:00:24, PPPOE: TX PADT[session=024a].
0days, 00:00:24, PPPOE: try special dial type 0.
0days, 00:00:24, PPPOE: TX PADI.
0days, 00:00:24, PPPOE: RX PADO, AC-NAME=WayOS_PPPoE, AC-MAC=00-22-15-96-c3-95.
0days, 00:00:24, PPPOE: TX PADR.
0days, 00:00:24, PPPOE: RX PADS[session=024b].
0days, 00:00:25, PPP: [LCP]TX CONFIGURE_REQUEST.
0days, 00:00:25, PPP: [LCP]RX CONFIGURE_ACK[mru=1464, magic=00004474].
0days, 00:00:25, PPP: [LCP]RX CONFIGURE_REQUEST.
0days, 00:00:25, PPP: [LCP]TX CONFIGURE_ACK[mru=1400, auth=C223/81, magic=20CB9DF5].
0days, 00:00:25, PPP: [CHAP]RX CHAP_CHALLENGE.
0days, 00:00:25, PPP: [CHAP]TX CHAP_RESPONSE.
0days, 00:00:25, PPP: [CHAP]RX CHAP_AUTHENTICATION_ACK.
0days, 00:00:25, PPP: [IPCP]RX CONFIGURE_REQUEST.
0days, 00:00:25, PPP: [IPCP]TX CONFIGURE_REQUEST.
0days, 00:00:25, PPP: [IPCP]TX CONFIGURE_ACK[ip=10.198.1.1].
0days, 00:00:25, PPP: [IPCP]RX CONFIGURE_NAK.
0days, 00:00:25, PPP: [IPCP]TX CONFIGURE_REQUEST.
0days, 00:00:25, PPP: [IPCP]RX CONFIGURE_ACK[ip=10.198.0.43, dns=10.198.1.1/10.198.1.1].
0days, 00:00:26, PPPOE: ppp0 set localIp 10.198.0.43 remoteIp 10.198.1.1 mtu 1400.
0days, 00:00:40, DHCPS: Send ACK to 190.168.1.100.
0days, 00:04:01, DHCPS: Send ACK to 190.168.1.100.
你的回答：
